All

•  Designed for use on the injector return side and pressure test kit for the Low Pressure side of a CRD  system. Consist of 314620 CRD Fuel Return Flow Kit & 314610 CRD Low Pressure Test Gauge Kit •  Measures low pressure feed from the fuel pump in the fuel tank to the highest pressure pump •  Also measures fuel return pressure where necessary •  Helps to diagnose poor or no engine starting, poor engine running, poor acceleration, general lack  of engine power, blocked filters, blocked fuel lines •  Compact acrylic block design provides easy to rea..

•  Specially designed to allow direct management  of the delivery process of the high pressure  pump, under engine cranking conditions •  Measures delivery pressure output from the CRD  High Pressure pump (max 1700 bar) under engine  cranking conditions •  Measures common rail pressure via the vehicles  electronic pressure sensor with the engine running •  Connects to all common CRD systems via the  pipes and adaptors supplied M12 x 1.5 / M14 x 1.5  connections •  Fault diagnosis is possible using a combination of ..

•  Unique combination of features makes this one of the  most productive circuit testers available •  Safe to use with EGM’s, sensors, transducers, airbags etc. •  No ground wire or clips required •  Detects from 3 to 28 volts •  Light, sound and vibration to indicate voltage •  Rugged stainless steel construction •  Unique V-groove needle accessory for wire piercing •  Solid state lamp for longer lasting performance •  Long life alkaline batteries included ..

o Hardened and tempered stainless steel gauge o Zero setting for comparative measurement o Metric or Imperial read-out o Range: 0-25mm / 0.1 inch o Resolution: 0.01mm/ 0.0005 inch o Accuracy: 0.05mm / 0.002 inch o Battery Type: SR44 / LR44..

o A new tool designed for rotating windback type pistons back into brake calipers when replacing or servicing brake pads o Suitable for use with 3/8 inch drive accessories o Chrome vanadium steel o Supplied in wallet..

Detects short or open circuits quickly and easily Enable faults to be detected without vehicle disassembly Traces troublesome circuits and locates faults inside harnesses, in conduit or behind panels or upholstery..

o Applications: Petrol 1.25/1.4/1.6/1.8/2.0 16v Petrol o Now updated to include latest 1.6 TI-VCT series eg, Focus/CMax 1.6..

o Applications: Petrol GM 1.4, 1.6, 1.8, 2.0 Eco-Tec engines o Suitable for models Corsa / Tigra / Meriva / Astra / Vectra / Zafira /Omega / Frontera and Sintra with engines 1.4/ 1.6/ 1.8/ 2.0 and 2.2 16v (95-04) Ecotec (Belt driven) ..

o All blades are etch marked with both metric and imperial sizes o Hardened and tempered to withstand prolonged workshop use o 0.005mm to 0.762mm 45 degree angle offset allows the blade to be used where access is restricted..

•  Suitable for stainless steel hydraulic and fuel lines •  Suitable for brake pipe sizes: SAE Single and Double  flares - 3/16” and 4.75mm, DIN Single flares - 4.75mm •  Revolutionary patented design, developed to  overcome the difficulties of creating flares on the  vehicle without sacrificing quality •  Creates SAE or DIN single or double lap flare forms in  an instant •  Extremely powerful - the design incorporates a unique  hydraulic powerpack ..

•  This popular flaring tool has become the industry   standard due to its speed, accuracy and reliability.  •  Produces convex and double lap flares to SAE and   DIN standards on automotive brake and clutch pipes.  ‘Dial a size’ punch turret with OP1 and OP2 punches   positioned next to each other •  Lever cam operated for quick and easy flaring •  Automatic punch extraction •  Screw clamp for accurate die alignment ..

Safest, easiest and most versatile option in the Australian market. Multi-application tool performs the work of three starndard belt stretching units. Made in the U.K...