Torque Wrenches

o Quick selection with cut-out o QuickRelease safety lock o Long term accuracy o 40-200Nm..

o No need for manual reset to zero o QuickSelect rapid torque setting o Distinct click stop signal o For clockwise and anticlockwise operation..

o No need for manual reset to zero o QuickSelect rapid torque setting o Distinct click stop signal o For clockwise and anticlockwise operation..

o No need for manual reset to zero o QuickSelect rapid torque setting o Distinct click stop signal o For clockwise and anticlockwise operation..

~9 separate pre-programme torque settings 20-200Nm ~Torque wrench warns audiovisually when desired torque reached. Orange light before you reach target torque, green light on target and red light above target torque. ~recallable memory storing the last 9 torque values..

Degree scale for after tightening of cylinder heads accuracy + or - 4 percent Individually tested to meet or exceed ISO standard Comes with test certificate...

3/8 inch drive Torque wrench, 20-100Nm, 15-75 Ft/Lb with inbuilt angular gauge Crow foot wrenches 10-19mm, TX sizes T8-T40 - 75mm and 125mm extensions..

~accuracy + or - 4 percent ~Comes with test certificate ~Degree scale for after tightening of cylinder heads ~Individually tested to meet or exceed ISO standard..

~accuracy + or - 4 percent ~Comes with test certificate ~Degree scale for after tightening of cylinder heads ~Individually tested to meet or exceed ISO standard..

~accuracy + or - 4 percent ~Comes with test certificate ~Degree scale for after tightening of cylinder heads ~Individually tested to meet or exceed ISO standard..

Incoming Dr: 1/2 inch, Outgoing Dr: 3/4 inch Max Force: 1400Nm, Max Force: 1000 Ft/Lb..

Incoming Dr: 3/4 inch, Outgoing Dr: 1 inch Max Force: 2700Nm, Max Force: 2000 Ft/Lb..